All Categories
Energy Storage System

Home /  Products /  Energy Storage System

All-In-One Movable Power Station

  • Overview
  • Recommended Products

Product parameters:

Inverter Parameters PH 3.6KW
Power 3.6KVA/3.6KW
Maximum photovoltaic input power 3.6KW
Two AC outputs Yes
Maximum one-way AC output power 3.6KVA/3.6KW
Maximum two-channel AC output power 3.6KVA/3.6KW
Maximum AC total output power 3.6KVA/3.6KW
Parallel machine function NO
Lithium-ion communication NO
Lithium battery activation Yes (photovoltaic or mains)
Input
Rated voltage 230VAC
Voltage range 170-280VAC (computer application); 90-280VAC (household appliances)
Frequency 50 /60 Hz (automatic detection)
Output
Rated voltage 220/230VAC±5%
Instantaneous power 5400VA
Frequency 50/60 Hz
Output waveform Pure Sine Wave
Switching time 10ms (computer application); 20ms (household appliances)
Peak efficiency (PV to INV) 96%
Peak power (Battery to lNV) 93%
Overpower protection 5s@>=140%load; 10s@100%~140% load
Peak coefficient 3:1
Power factor 0.6~1 (capacitive or inductive)
Grid connection mode Not support
PV Charging & Ac Charging
Charge mode MPPT
Maximum photovoltaic input power 5000W
Maximum photovoltaic open circuit voltage 500VDC
MPPT voltage range 40VDC-450VDC
Maximum photovoltaic input current 18A
Maximum photovoltaic charging current 100A
Maximum mains charging current 100A
Maximum charging current 100A
Battery capacity selection
Battery Parameters 7.68KWH 16KWH Remarks
General
Nominal Capacity 300Ah 314Ah

0.5C /0.3C charging,

1C discharging, 25 C

Rated Voltage 25.6V 51.2V 8S/16S
Discharge Cut-off Voltage 22V 44V
Charging Cut-off Voltage 26.6V 56.4V
Float charging voltage 27V 56V
Continuous charging maximum current 100A 160A
Maximum current for continuous discharge 150A
Battery Energy 7680Wh 16000Wh
Rated Output Power 3600W 6000W
Communication Interface NO RS232 / RS485 / Dry Contact
Discharge working temperature -15℃~50℃
Charging working temperature 0℃~50℃
Relative Humidity 5~90%
Altitude ≤4000m
Protection Grade IP21
Storage Time Keep charging at least once every 3 months
Number of cycles ≥6000 times 75% DOD 25℃
Main Parameters For BMS
Overcharge Protection Overcharge detection voltage (V) Monomer 3.65 ± 0.05
Overcharge protection delay (S) 0.5
Over Discharge Protection Overdischarge detection voltage (V) Monomer 2.7 ± 0.05
Overdischarge detection delay (S) 0.5
Overcurrent Protection Greater than rated current 1.1%
Overcurrent Recovery Disconnect Load /
Self Consumption Power Working Current (mA) ≤10
Sleep Current (uA) ≤50
Physical Property
Product Size, length x width x height (mm) 740*400*240 1050*460*240
Package Size,length x width x height (mm) 765*465*400 1085*520*300
Net Weight (Kgs) 65.75 122
Gross Weight (Kgs) 77.75 124
LCD Yes
Application Environment
Operating temperature range -10°C to 55°C
Storage temperature range -15°C-60°C
Humidity 5% to 95% relative humidity (no frost)

Product parameters:

Inverter Parameters PH 6KW
Power 6KVA/6KW
Maximum photovoltaic input power 6KW
Two AC outputs Yes
Maximum one-way AC output power 6KVA/6KW
Maximum two-channel AC output power 6KVA/6KW
Maximum AC total output power 6KVA/6KW
Parallel machine function NO
Lithium-ion communication RS232/RS485 / Dry Contact
Lithium battery activation Yes (photovoltaic or mains)
Input
Rated voltage 230VAC
Voltage range 170-280VAC (computer application); 90-280VAC (household appliances)
Frequency 50 /60 Hz (automatic detection)
Output
Rated voltage 220/240VAC±5%
Instantaneous power 9000VA
Frequency 50/60 Hz
Output waveform Pure Sine Wave
Switching time 10ms (computer application); 20ms (household appliances)
Peak efficiency (PV to INV) 96%
Peak power (Battery to lNV) 93%
Overpower protection 5s@>=140%load; 10s@100%~140% load
Peak coefficient 3:1
Power factor 0.6~1 (capacitive or inductive)
Grid connection mode Not support
PV Charging & Ac Charging
Charge mode MPPT
Maximum photovoltaic input power 9000W
Maximum photovoltaic open circuit voltage 500VDC
MPPT voltage range 60VDC-450VDC
Maximum photovoltaic input current 27A
Maximum photovoltaic charging current 120A
Maximum mains charging current 120A
Maximum charging current 120A
Battery capacity selection
Battery Parameters 7.68KWH 16KWH Remarks
General
Nominal Capacity 300Ah 314Ah

0.5C /0.3C charging,

1C discharging, 25 C

Rated Voltage 25.6V 51.2V 8S/16S
Discharge Cut-off Voltage 22V 44V
Charging Cut-off Voltage 26.6V 56.4V
Float charging voltage 27V 56V
Continuous charging maximum current 100A 160A
Maximum current for continuous discharge 150A
Battery Energy 7680Wh 16000Wh
Rated Output Power 3600W 6000W
Communication Interface NO RS232 / RS485 / Dry Contact
Discharge working temperature -15℃~50℃
Charging working temperature 0℃~50℃
Relative Humidity 5~90%
Altitude ≤4000m
Protection Grade IP21
Storage Time Keep charging at least once every 3 months
Number of cycles ≥6000 times 75% DOD 25℃
Main Parameters For BMS
Overcharge Protection Overcharge detection voltage (V) Monomer 3.65 ± 0.05
Overcharge protection delay (S) 0.5
Over Discharge Protection Overdischarge detection voltage (V) Monomer 2.7 ± 0.05
Overdischarge detection delay (S) 0.5
Overcurrent Protection Greater than rated current 1.1%
Overcurrent Recovery Disconnect Load /
Self Consumption Power Working Current (mA) ≤10
Sleep Current (uA) ≤50
Physical Property
Product Size, length x width x height (mm) 740*400*240 1050*460*240
Package Size,length x width x height (mm) 765*465*400 1085*520*300
Net Weight (Kgs) 65.75 122
Gross Weight (Kgs) 77.75 124
LCD Yes
Application Environment
Operating temperature range -10°C to 55°C
Storage temperature range -15°C-60°C
Humidity 5% to 95% relative humidity (no frost)

Get a Free Quote

Our representative will contact you soon.
Email
Whatsapp
Name
Company Name
Message
0/1000

Get a Quote

Demand type
Name
Country
Company Name
Mobile
Email
Message
0/1000